Fence Company Waxhaw NC | Cedar & Wood Fencing | Amour Fence

Custom Wood Fence Installation in Waxhaw, NC

Waxhaw is one of the fastest-growing and most sought-after communities in the greater Charlotte metro — and for good reason. Spacious lots, tree-lined streets, and a genuinely small-town character make it a place where homeowners invest seriously in their properties. At Amour Fence, we specialize exclusively in natural wood fencing, and Waxhaw is one of our most active service areas.

Whether you’re enclosing a half-acre backyard on Kensington Drive, adding a cedar privacy fence to a new build in Cuthbertson Farms, or installing a split-rail boundary around an equestrian property on the outskirts of Waxhaw, our crews arrive with the right materials, the right tools, and the craftsmanship to match the neighborhood’s premium standard.

We are a direct contractor — no franchise fees, no middleman markup — which means the budget goes into your fence, not into a corporate overhead structure.

Ready to get started? Request your free estimate or call (980) 300-1047.

Built for Waxhaw’s Large Properties and Union County Soil

Waxhaw’s defining landscape features are its generous lot sizes — many properties run from a third of an acre to well over two acres. That scale changes how fencing projects are planned and executed, and it’s where experience matters most.

Clay soil and post depth. Like the rest of Union County, Waxhaw sits on dense Piedmont red clay. Clay holds moisture exceptionally well, which puts constant pressure on fence posts that aren’t set correctly. We set every post a minimum of 24 to 36 inches deep and concrete each one below the local frost line. This prevents frost heave in winter and resists the lateral pressure that waterlogged clay generates during heavy summer rain.

Humidity and wood selection. Waxhaw summers are hot and humid — the kind of humid that accelerates fungal growth on untreated or low-quality lumber within a single season. Western Red Cedar is our flagship material here for good reason: its natural tannins and oils provide built-in resistance to rot and to the subterranean termites that are active throughout the Piedmont region. For posts and structural members on tighter budgets, pressure-treated pine provides reliable, long-term performance in wet Carolinas soil.

Large perimeters and grading. Properties with rolling topography — common in the Waxhaw area — require racked or stepped fence panels to follow grade changes cleanly. Our installations account for slope from the initial layout, ensuring the fence line is level where it needs to be and graduated where the terrain demands it. There are no visible gaps, no uneven panel heights.

Popular Fence Styles in Waxhaw

Waxhaw homeowners tend to want privacy without sacrificing character. The most requested styles we install in the area:

Board-on-Board Privacy Fence — The neighborhood standard in Union County subdivisions. Alternating boards overlap slightly, creating a fully opaque barrier from any angle while still allowing some airflow between the boards. Available in Western Red Cedar or pressure-treated pine, heights from 4 to 8 feet.

Shadowbox Fence — Similar to board-on-board but with a more architectural look — boards alternate on both sides of the rail, giving the fence an attractive finished appearance from the street as well as the yard. A popular choice where HOA rules require a “good neighbor” fence design.

Privacy Fence with Decorative Top — For luxury properties and custom builds, we add lattice panels, arched top rails, or routed board tops to standard privacy fencing. This is a common upgrade on Waxhaw’s larger estate-style lots where curb appeal carries real weight.

Ranch Rail / 3-Rail Fence — For equestrian boundaries, open pasture edges, or large wooded perimeters where a visual border is needed without full enclosure. Pressure-treated pine is the standard material; cedar is available for a more refined finish.

Picket Fence — Classic, low-profile front-yard fencing that complements Waxhaw’s traditional architectural styles. We build picket fences with dog-ear or Gothic-top boards and set them to HOA-compliant heights.

Explore all available styles at our fence styles overview or see the full installation process.

Western Red Cedar vs Pressure-Treated Pine in Waxhaw

Both materials perform well in Union County’s climate when installed correctly. The right choice depends on your priorities:

For most Waxhaw homeowners who are investing in a premium property, Western Red Cedar is the right long-term choice. For large perimeter projects where total linear footage drives the budget, a hybrid approach — cedar pickets on pressure-treated framing — offers a practical middle ground.

Learn more about Western Red Cedar fencing or Pressure-Treated Pine.

Navigating Waxhaw HOA Requirements and Union County Regulations

Waxhaw has a high concentration of HOA-governed communities — Ryno Farm, Kensington, Cureton, Cuthbertson Farms, and many of the newer developments along Kensington Drive and Potter Road. Before any fence installation, we recommend the following steps:

1. Review your HOA Architectural Guidelines. Most Waxhaw HOAs specify allowable fence heights (typically 4–6 ft in rear yards, lower in front), approved materials, approved colors or finishes, and whether the “finished side” must face outward. Some HOAs require pre-approval and a site plan submission before work begins. We can help you prepare documentation if needed.

2. Confirm Union County permit requirements. Union County requires a Zoning Permit for most new fence installations. Your installer needs a copy of your property survey (plat) showing lot lines. We coordinate permit applications on your behalf when required and never begin work without confirmed approvals.

3. Call 811 before any digging. North Carolina 811 (NC811) is the free utility-location service. We call NC811 before every installation — it is state law and protects underground lines from damage during post installation.

4. Corner lot and easement setbacks. Many Waxhaw properties back to wooded buffers, greenways, or utility easements. Fence lines must respect these setbacks. Our estimators walk the full perimeter during the free on-site visit and flag any potential setback issues before a single post is set.

Our Fence Installation Process

We keep the process straightforward from first call to final board:

1. Free on-site estimate — We visit your property, measure the perimeter, evaluate the terrain, discuss material and style options, and answer any HOA or permit questions. No obligation, no pressure.
2. Permit coordination — Where required, we handle Union County zoning permit paperwork so you don’t have to navigate the process alone.
3. NC811 utility locate — Called before every dig, no exceptions.
4. Material delivery and layout — Posts and lumber arrive on installation day. We chalk the fence line and review it with you before any holes are dug.
5. Post setting — Holes augered to proper depth, posts set plumb, concrete poured and allowed to cure.
6. Rail and board installation — Rails attached with structural hardware, boards installed with ring-shank galvanized or stainless nails that won’t rust or stain the cedar.
7. Final walkthrough — We walk the completed fence with you, confirm gates swing and latch correctly, and leave the site clean.

See the full details on our fence installation page.

Frequently Asked Questions

Do you serve all of Waxhaw, NC, including rural properties outside the town limits? Yes. We serve the entire Waxhaw ZIP code area (28173), including properties in Union County outside the Waxhaw town limits. Rural and larger-acreage properties are welcome — ranch rail, split rail, and perimeter fencing for equestrian or agricultural use are part of our regular work in the area.

How long does a typical fence installation take in Waxhaw? Most residential projects — including a standard 200-to-300 linear foot privacy fence — are completed in one to two days once permits are approved and materials are on-site. Larger perimeters or properties with significant grade change may take an additional day. We give you a realistic timeline at the estimate visit, not a guess.

Does Amour Fence work with Waxhaw HOAs directly? We are familiar with the requirements of the major Waxhaw HOA communities and can provide documentation, material samples, or a site plan sketch to support your HOA approval application. Approval is ultimately between the homeowner and the HOA, but we make the submission process as easy as possible.

Is a cedar fence worth the investment for a Waxhaw property? In almost every case, yes. Waxhaw’s humid summers and clay soil create conditions where inferior lumber deteriorates quickly. Cedar’s natural rot and insect resistance, combined with its dimensional stability in changing moisture conditions, means you spend less on maintenance and replacement over a 10-to-20-year horizon. For a premium property in Waxhaw, cedar is the material that holds its value.

Get Your Free Waxhaw Fence Estimate

Amour Fence serves Waxhaw and all of Union County. We are a wood fence specialty contractor — cedar and pine, built right, built to last in the Carolinas climate.

No vinyl. No chain link. Just genuine craftsmanship with natural wood.

Schedule Your Free Estimate{.btn-primary}   or call (980) 300-1047

We serve Waxhaw alongside neighboring communities including Matthews, NC, Fort Mill, SC, and all points across the Charlotte metro area.